Filter
Top Products
DTB-9401F
DIGITAL TERRESTRIAL RECEIV
BASIC FUNCTIONS
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following picture(banner)
each time you switch channels:
● Press the red( i ) key in view mode.
● Select the channel by pressing the Numerical 0~9 keys or
ᮡ
/
ᮢ
keys and select the
TV/RADIO key to move to TV or Radio channel.
You will also see this picture each time you change channels.
When you press the TV/RADIO key on the Remote Control Unit, TV and Radio program are
toggled.
Detailed program information
● Press the red( i ) key twice while you are viewing a program.
First you will see the banner described above.
After the red( i ) key is pressed in the second time, detailed information for current program can
be displyed on another banner, if there is more information. When this information is more than
one page, Pg+/Pg- can be used for page up and down.
NNoottee : This service depends on service provider.
2. Volume Control
To control the volume level :
● Press the
ᮤ
/
ᮣ
keys to adjust the volume level.
● Press the MUTE key to turn to silence mode.
● Press the MUTE key again or
ᮤ
/
ᮣ
keys in order to cancel the mute function.
Program Information Current Favorite The number of soundtrack in current channelSignal Status
Channel Number
GB-12
DTB-9401F GB 0425 4/25/03 11:54 AM Page 12