Filter
Top Products
English _15
! CONNECTING WITH OTHER DEVICE
CONNECTING EXTERNAL DEVICES
`
The following figures are based on Model SDR-C5300.
CONNECTING THE USB
1. By factory default, a USB port is provided for external connection.
2. You can connect a USB HDD, USB memory or mouse to the USB port.
3. If a USB HDD is connected to the system, recognition and settings are available in “Main Menu > Setting the
Device > Storage Device”. (Page 47)
4. This product supports hot-plugging, which connects/removes the USB device during the system operation.
J
`
If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
CONNECTING EXTERNAL SATA HDD (ESATA)
External SATA port is provided on the rear panel.
If connected to the system, the external SATA HDD (eSATA) can be recognized and configured in “Main Menu >
Device > Storage Device”.
J
`
Use a cable shorter than 1 m for the external external SATA HDD (eSATA) connections.
`
Unexpected disconnection to a device in use which is connected via eSATA may restart the system. Check whether the
device is in use before disconnecting it.
`
In the event of replacing an HDD of an external SATA HDD, please power off the external SATA HDD to change the HDD.
CH2
CH1
CH3
CH4
AUDIO IN
AUDIO OUT
VGA
DC 12 V
VIDEO IN
RS485
HDMI
POWER
USB
LAN
eSATA