Filter
Top Products
18_ connecting with other device
connecting with other device
CONNECTING THE RS-485 DEVICE
Connect the rear [RS-485 +, –] port to the PTZ camera.
J
`
You can connect and control the PTZ camera which supports the RS-485 communication.
`
Check if the RS-485 device is compatible with the product first.
`
Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.
`
Depending on camera’s type, connection polarity can be different. For further information,
refer to the respective PTZ Camera’s documentation.
CONNECTING THE NETWORK
`
The following figures are based on Model SDR-C5300.
Connecting to network through Ethernet (10/100BaseT)
RS485
CH2
CH1
CH3
CH4
AUDIO IN
AUDIO OUT
VGA
DC 12 V
VIDEO IN
RS485
HDMI
POWER
USB
LAN
eSATA
RJ-45 Ethernet Cable
(Direct Cable)
Back Bone
Hub/Switcher
Hub/Switcher
Windows
Network Viewer
NETWORK