Samsung SDS-P3042 DVR User Manual


 
50_ main menu
main menu
Remote Devices
You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
▲▼
) in <Device> window to
move to <Remote Device>, and press [ENTER] button.
2. Use direction buttons (
▲▼_ +
) to move to the desired
item, and press [ENTER] button.
3. Set the values of each communication setup of the remote
device.
• Baudrate : Baud rate settings of the DVR, PTZ camera and
system keyboard should be matched for proper operations.
4. Make sure to match IDs of the DVR, System Keyboard
and Remote Control, and press <OK>.
M
`
For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 13)
Remote Control ON ID 0
Baudrate Parity Data Stop Bit Transfer type
9600

None
8

1

Half Duplex
Remote Device
OK Cancel