Filter
Top Products
16_ installation
installation
Adding a HDD
Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
Number of HDDs to install : SHR-7082/7162/8082/8162 : Default 1 HDD + Up to 4 HDDs added
SHR-7080/7160/8080/8160 : Default 1 HDD + Up to 5 HDDs added
By factory default, the master unit is equipped with one HDD.
The following instructions are when you have installed the maximum number of HDDs on the master unit.
First, loosen the screws in the left and right sides
and remove the cover.
1) If adding HDDs to SHR-7080, 7160, 8080 & 8160
For SHR-7082/7162/8082/8162 models, see the following page.
Loosen the screws (x4) in the left/right and upper
sides and remove the upper and lower brackets.
Install HDDs (x3) on the lower bracket and fi x them
with screws.
The screw (UNC 6-32) to use in the installation comes with
the HDD.
Firmly secure the screw so that it can not get loose from
such as vibration.
Install HDDs (x2) on the upper bracket and fi x them
with screws.
M
`
`
`
1.
M
`
2.
3.
`
`
4.
Cover
Upper Bracket
Lower
Bracket
Lower Bracket
Upper Bracket
Add
Installed by
default
Add
Add
Add
Add
00769B_SHR-8162_ENG-NEW.indb 16 2008-12-04 오전 10:14:01