Filter
Top Products
98_ appendix
appendix
DEFAULT SETTING
This returns the factory default settings.
The settings are made as follows;
Use System/Load Factory Default in MENU
In Live mode, press and hold down [MODE] and then [PTZ] on the front panel for 6 seconds to reset the settings.
Category
Details Factory Default
System Settings
Date/Time/Language Date/Time/Language
Date YYYY-MM-DD
Time Format 24 hours
Time Zone GMT
Time Synchronize OFF
DST OFF
Language English
Permission
Management
Admin
ID admin
New Password 4321
Setting
Restricted Access All
Auto Logout 3 Min
System Management System Information Broadcast Format NTSC/PAL
Device
Camera
Camera
Video ON
Audio OFF
CH Name CAM 01 ~ CAM 16
SEQ-Dwell Time 5sec
PTZ
ID Camera No.
Protocol None
Screen Setup
Brightness 50
Contrast 50
Color 50
Storage Device HDD Alarm
Check Alarm Output Port OFF
Duration OFF
Replace Alarm Output Port OFF
Duration OFF
Remote Device
Baudrate 9600
Parity None
Data 8
Stop bit 1
Transfer Type Half Duplex
System Keyboard OFF
Remote Control ON(0)
~
~
00769B_SHR-8162_ENG-NEW.indb 98 2008-12-04 오전 10:17:45