Filter
Top Products
15
ENG
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while, and then the
Language menu is
automatically displayed.
2 Select the appropriate language by pressing the † or … button.
3 Press the ENTER () button to confirm your choice.
Result
: The message Antenna Input Check is displayed.
4 Make sure that the antenna is connected to the TV, and then
press the
ENTER () button.
Result
: The Area menu is displayed.
5 Select your area by pressing the † or … button.
6 Press the ENTER () button to confirm your choice.
Result
: The Auto Store menu is displayed.
7 To start the search, select the Start and press the ENTER ()
button.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
➢ To stop the search before it has finished or return to normal
viewing, press the
EXIT () or ENTER () button.
8 When it has finished, the message Enjoy your watching is
displayed, and then the channel which has been stored will be
activated.
Plug & Play Feature
Plug & Play
Start
Exit
Press ENTER to start Plug & Play.
English
Français
Türkçe
Language
Move
Enter Exit
Asia/W. Europe
CIS/E. Europe
China
Hongkong/UK
Australia
NZ/Insonesia
South Africa
America
Area
Move
Enter Exit
Plug & Play
Start
Exit
Antenna Input Check
Auto Store
Start
Exit
Press ENTER to start channel store.
Channel store in process.
Storing 175MHz
18%
Auto Store
Exit
Enjoy your watching