Filter
Top Products
14
ENG
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result
: The message Start Plug & Play is displayed.
2 To start the Plug & Play, press the ENTER () button.
Result
: The Language menu is displayed.
3 Select the appropriate language by pressing the ▲ or ▼ button.
Press the
ENTER () button to confirm the language.
Result
: The message Check antenna input. is displayed.
4 Make sure that the antenna is connected to the TV, and then
press the
ENTER () button.
Result
: The Country menu is displayed.
5 Select your country by pressing the ▲ or ▼ button. Press the
ENTER () button to confirm your choice.
Result
: The Search menu is displayed.
6 To start the channel store, press the ENTER () button.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the
Clock menu is displayed.
➢
To stop the search before it has finished or return to normal
viewing, press the
MENU () button.
7 Press the œ or √ button to move to the Hour or Minute.
Set the hour or minute by pressing the
▲ or ▼ button.
➢
You can also set the Hour and Minute by pressing the
numeric buttons directly.
8 Press the ENTER () button.
9 When the setting has finished all, the message Enjoy your
watching.
is displayed, and then the channel which has been
stored will be activated.
Plug & Play Feature
Plug & Play
œœ √√
Move Adjust
Enter Skip
Hour Minute
-- --
Enjoy your watching.
Plug & Play
OK
Language
English
ългарски
Hrvatski
Čeština
Nederlands
Français
††
Plug & Play
Move
Enter Skip
Country
Belgium
Germany
Spain
France
Italy
Netherlands
††
Plug & Play
Move Enter Skip
Start Plug & Play
Plug & Play
Enter Return
OK
Check antenna input.
Plug & Play
Enter Skip
OK
Search
Enter Skip
Start