Filter
Top Products
English - 13
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
2 To start the Plug & Play, select the Start and press the ENTER
button.
Result
: The available languages are listed.
3 Select the appropriate language by pressing the … or † button.
Press the
ENTER button to confirm your choice.
Result
: The message Check antenna input is displayed.
4 Make sure that the antenna is connected to the TV, and then
press the
ENTER button.
Result
: The available areas are listed.
5 Select the appropriate area by pressing the … or † button.
Press the
ENTER button to confirm your choice.
Result
: The Auto Store menu is displayed.
6 Press the ENTER button to start the search
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
➢ To stop the search before it has finished or return to normal
viewing, press the
EXIT or ENTER button.
7 When the channels have been stored, the Clock Set menu is
displayed. Press the
ENTER button to set the current time.
Press the
œ or √ button to move to the hour or minute.
Set these by pressing the
… or † button.
Press the
ENTER button to confirm your choice.
8 When it has finished, the message Enjoy your watching is
displayed, and then the channel which has been stored will be
activated.
Plug & Play Feature
Plug & Play
Start
Start Plug & Play
Language
Plug & Play
Move
Enter Skip
Area
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
Plug & Play
Move
Enter Skip
Enter Return
Plug & Play
OK
Check antenna input.
Enter Skip
Plug & Play
Start
Auto Store
Enter Skip
Plug & Play
Stop
Auto Store
175 MHz
18%
Enter Skip
Plug & Play
Clock Set : - - : - -
Enter Skip
Enjoy your watching.
OK
BP68-00391A-00Eng 7/29/04 2:52 PM Page 13