Filter
Top Products
English - 7
n
s
( :On, :Blinking, :Off)
TIMER LAMP STAND BY/TEMP Indication
Standby mode.
A timer pilot lights when Timer Auto On or Off is selected.
Normal operation.
Normal operation (when Timer Auto On or Off is selected).
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds. (when Timer Auto On or
Off is selected)
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in the
rear of the TV. Turn the TV back on after 1 hour.
The lamp does not work, please contact an authorized Service Center for
assistance.
➢
◆
It takes about 30 seconds for the TV to warm up, so normal brightness may not appear
immediately.
◆
The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it
working.
◆
You can use the channel selection buttons to switch on the TV when it is in standby mode
depending on the model.
◆
When using the on-screen menu the volume adjustment and channel selection buttons have
the same function as the
…/†/œ/√ buttons on the remote control.
◆
If the remote control no longer works or you have lost it, you can use controls on the panel
of the TV.
◆
Press the "
I
" side of the POWER switch to supply power to the TV. If the "
I
" side of the
POWER switch is not pressed, the
POWER button on the remote control and the Picture
On/Off switch on the front panel of the TV will not work.
BP68-00608A-01Eng 6/7/06 4:57 PM Page 7