Filter
Top Products
26
ENG
◆ SCAN MODE
You will normally find that scan mode is best set to AUTO to
reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode.
AUTO, NATURAL, DIGITAL and
PROG. (Progressive) modes are available.
◆ DIGITAL NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
◆ LNA
This feature is very useful in the situation that the TV is used
in a weak signal and amplifies the TV signal in the weak
signal area, but not noise.
1 Press the MENU button.
Result
:
The options available in the
PICTURE
group are
displayed.
2 Press the button.
3 Select the required option (SCAN MODE, DIGITAL NR, or LNA) by
pressing the
▼ or ▲ button.
4 Press the ➛ or ❿ button to change the setting.
◆
SCAN MODE : AUTO, NATURAL, DIGITAL, PROG.(Progressive)
◆
DIGITAL NR : OFF or ON (activating)
◆
LNA : OFF or ON (activating)
Extra Picture Settings
SELECT ADJUST EXIT
PICTURE
MODE
œœ
DYNAMIC
√√
ADJUST
√√
SCAN MODE : AUTO
DIGITAL NR : OFF
LNA : OFF
SELECT ADJUST EXIT
PICTURE
MODE
œœ
DYNAMIC
√√
ADJUST
√√
SCAN MODE : AUTO
DIGITAL NR : ON
LNA : OFF
SELECT ADJUST EXIT
PICTURE
MODE
œœ
DYNAMIC
√√
ADJUST
√√
SCAN MODE : AUTO
DIGITAL NR : OFF
LNA : ON