Filter
Top Products
Channel selection
:
If you select [ ] button, the screen shown as below shall be displayed.
You can select the desired camera or search among no. 1~16 cameras.
If you select [ ] button, the screen shall be changed over to DVR control screen.
DVR control mode close
: If you select [ ] button, you can exit from the DVR control DVR.
Appendix
5-10
SPR-7116
0 0 1
0 0 0
5-11
11
External monitor 2 output quality
control
When using an external monitor over a long distance the quality of the picture can be
reduced, also the picture might shake or have some interference. This is because the
power of the signal can drop over a long distance.
To overcome this problem you can use the control switch on the back panel of the DVR
ON OFF
1 2 3 4
ON OFF
1 2 3 4
ON OFF
1 2 3 4
External monitor 2
External monitor output
Control switch
Spot monitor 1
S-VIDEO Connection
[Display Board]
<SPR-7116 Model>
[Warning]
External monitor setup function only can be applied to external
moniter output 2, not external monitor output 1.