Filter
Top Products
46_ using the DVR
using the DVR
Storage Device
You can check information on storage devices.
Confi rming Devices
You can check storage devices and their free space, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD, CD/DVD).
Using the mouse may help make setup easier.
Use the up/down buttons (
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
Select <Device>.
No. : Shows the assigned number of the internal HDD.
To see the detailed positioning of the HDD according to the
number, refer to <HDD Map>.
Used/Total : Shows the used/total capacity of the storage
device.
Usage : Sets the storage device’s usage.
- USB memory is used only for backups.
External USB HDD, SATA HDD are used for extension and backup.
A maximum of 2TB for each port is supported for backup on a high capacity SATA HDD such as RAID equipment
(ex: SVS-5R), and a maximum of 4TB for extension purposes.
SVS-5R supports only RAID1 and RAID5.
Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.
- Normal : Available to use
- Check : Available to use but recommended to replace
- Replace : Requires immediate replacement.
HDD Map : Shows the internal HDD’s locations according to
assigned numbers.
Refer to this for servicing or additional HDD installation.
To move to the previous menu, press <OK>.
1.
2.
•
•
•
•
•
3.
Storage Device
Device
Format
OK Cancel
HDD Alarm
HDD Map
Device No. Used/Total Usage Status/Management
HDD 1 12.28G/499.37G Internal Normal
CD/DVD – 0 / 0 Backup Normal
<SRD-852D/1652D>
HDD Map
OK