Filter
Top Products
English _105
APPENDIX
Symptom Countermeasures
Recording does not work. If your player does not display a Live image at all, that indicates
recording does not work so fi rst check if you see an image on the
screen.
Recording does not work if the recording settings are not properly
confi gured.
Manual Record: Press the [REC] button on the front panel of the DVR
or on the remote control to start recording.
Scheduled Record: Specify a desired time in Menu – Record -
Recording Schedule. Recording will start at the specifi ed time.
<Continuous> Record: Recording will proceed in any conditions
at the specifi ed time.
<Event> Record: When an event occurs, recording will perform
only if the event is of alarm, motion detection and video loss.
If there is no event found, recording will not perform.
<Continuous / Event> Record: If there is no event found,
Continuous recording will perform. Whereas, if an event occurs,
Event recording will perform.
y
y
1)
2)
-
-
-
The image quality of the recording data is not good. Increase the resolution and quality level in Menu – Record – Quality /
Resolution.
Resolution: Select a bigger size when specifying the recording size.
(4CIF> 2CIF>CIF)
The recording image in the CIF format shows a deteriorated quality
as it is enlarged from a small-sized image.
Record Quality: Specify a bigger level for the recording quality.
If you increase the resolution and the recording quality, the data size
increases accordingly. So the HDD will be fi lled faster. Overwriting will
overwrite the existing data so recording will proceed at a shorter
interval.
y
1)
2)
y
Z6806127401A_SRD-470, 470D-IB_EN105 105Z6806127401A_SRD-470, 470D-IB_EN105 105 2010-04-30 오후 6:11:512010-04-30 오후 6:11:51