Filter
Top Products
English _21
! CONNECTING WITH OTHER DEVICE
CONNECTING EXTERNAL SATA HDD
SRD-830/830D/1610/1610D/1630/1630D does not support a port for SATA connection.
There are two external SATA ports on the rear side of the product.
If an external SATA HDD is connected to the system, recognition and settings are available in “Menu > Device >
Storage Device”.
The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the
system is in use.
Only one SATA HDD can be connected to an external SATA port.
Use a cable shorter than 1 m for the external SATA HDD connections.
CONNECTING POS DEVICE
You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.
Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>. (Page 51)
CONNECTING THE ALARM INPUT/OUTPUT
The Alarm In/Out port at the back is composed of the following.
Alarm In Port for SRD-830/830D/850/850D/870/870D
Alarm In Port for SRD-1610/1610D/1630/1630D/1650/1650D/
1670/1670D
Alarm Out Port
M
`
1.
2.
3.
J
`
`
1.
2.
1.
2.
3.