Filter
Top Products
11
1
Use a screwdriver to
remove the screw as
shown in the picture.
2
Remove the Lamp cover.
3
Use a screwdriver to
remove the screws
securing the Lamp.
There are 2 screws: one
on the left and one on the
right. When the screws
have been completely
unfastened, they will still
be connected to the body
of the Lamp.
4
Separate the Lamp from
the engine by holding the
handle and pulling it out.
5
To reinstall the Lamp, fol-
low these steps in reverse
order.
NOTE
• Be sure the replacement Lamp is the same model.