Samsung SV-450X VCR User Manual


 
GB
17
GB
16
Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding
or
buttons, until the VCR OUTPUT
CH option is selected.
5 Select the required output channel by pressing the
or
buttons.
6 On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
Setting the VCR Output Channel
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷☎☎
➛❿☎☎
OK END:MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
➐❷
END:MENU
(SV-655B/650B/450B/255B/250B)
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
➐❷
END:MENU
(SV-655X/650X/450X/250X)
Displaying/Hiding On-Screen Information
Choosing Your Language
You can change the language in which information is displayed on
the screen.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
LANGUAGE SET option.
3 Press the OK button to select this option.
Result
: The LANGUAGE SET menu is displayed.
4 Select the required language by pressing the
or
buttons.
5 Press OK to store the language selected.
6 Press MENU to exit the menu.
Result
: From now on, all the on-screen information will be
displayed in the language selected.
Your VCR displays most information both on the VCR and the
television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and G-CODE
(SV-655B/655X/255B only) function, which cannot be hidden).
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
USER SET option.
3 Press the OK button to select this option.
Result
: The
USER SET menu is displayed.
4 Press the corresponding
or
buttons, until the OSD option is
selected.
5 To... Press
or
, until...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6 On completion, press MENU twice to exit the menu.
LANGUAGE SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
❷☎☎
➛❿☎☎
OK END:MENU
LANG
USER SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
OPTIONS
❷☎☎
➛❿☎☎
OK END:MENU
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
➐❷
END:MENU