Filter
Top Products
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 18 and 19.
1 Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
3 Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result
: The VCR is switched on automatically.
4 Select:
◆
The station to be recorded using the
PROG (
"
or
❷
)
buttons
or
◆ The AV1 or AV2
★
(SV-6333X/SV-2333X only) source using
the INPUT button for a satellite tuner or external video source
Result
: The station number is displayed and the programme
can be seen on the television.
★
With SV-6333X/SV-6332X, you can select the recording speed
(SP/LP). Press the SPEED button.
5 Hold REC (
●
) down for a while to start recording.
Result
:
The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 35).
6 To stop recording, press
■
once.
➢ ◆ If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
GB
2524
Recording a Programme with Automatic Stop
R
E
C
M
E
N
U
A
U
D
I
O
S
P
E
E
D
D
U
B
T
V
/
V
C
R
REPEAT
6
3
DAUER 2:30
DAUER EINSTELLEN:
REC DRÜCKEN
Recording a Programme Immediately
OK
6
R
E
C
M
E
N
U
A
U
D
I
O
S
P
E
E
D
D
U
B
T
V
/
V
C
R
OK
DISPLAY
C
LR/RST F.ADV
INPUT INDEX
TRK PROG
R
E
C
M
E
N
U
A
U
D
I
O
B
T
V
/
V
R
EPEAT
★
5
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot
record on the tape.
1 If you wish to protect a cassette, break off the tab using a small
screwdriver.
2 To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
1
4
4
DISPLAY
V-LOCK
LR/RST F.ADV
INPUT INDEX
TRK PROG
R
E
C
M
E
N
U
A
U
D
I
O
REPEAT
4
4
★
This function enables you to record up to nine hours of
programmes. (LP)
Your VCR stops automatically after the requested length of time.
1 Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used)
3 Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result
: The VCR is switched on automatically.
4 Select:
◆
The station to be recorded using the
PROG (
"
or
❷
)
buttons
or
◆ The AV1 or AV2
★
(SV-6333X/SV-2333X only) source using
the INPUT button for a satellite tuner or external video source
Result
: The channel number is displayed and the programme
can be seen on the television.
★
With SV-6333X/SV-6332X, you can select the recording speed
(SP/LP). Press the SPEED button.
5 Hold the REC button (
●
) down for a while to start recording.
Result
: The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 35).
6 Press the REC button (
●
) several times to increase the recording
time in:
◆ 30-minute intervals up to four hours
◆ 1-hour intervals up to nine hours (LP)
Result
: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
7 If you wish to cancel the recording before the end, press
STANDBY/ON.
☛ If the end of the tape is reached while recording:
◆ The recording stops
◆ The VCR automatically turns off