Filter
Top Products
GB
3332
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢ When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
Selecting the Audio Output Mode (SV-6333X/SV-6332X)
E
C
M
E
N
U
A
U
D
I
O
S
P
E
E
D
D
U
B
T
V
/
V
C
R
P
EAT
L R MIX
L R MONO
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢
◆ When playing back a cassette, the standard is
automatically selected by the VCR.
◆ When you playback an NTSC-recorded tape on this VCR
make a setting on the colour system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
#
,
❷!
or
➛
,
❿
buttons to select the
EINSTELLUNGEN option.
3 Press the OK button to select this option.
Result
: The EINSTELLUNGEN menu is displayed.
4 Press the corresponding
#
or
❷
buttons, until the cursor is
placed in front of the
FARBSYSTEM option.
5 Press the
❿
button to select AUTO
➝
PAL
➝
MESECAM
➝
B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the VCR.
B/W Black and White
6 On completion, press MENU twice to exit the menu.
FORMAT 16:9 (WIDE SCREEN)
★
(SV-6333X/SV-2333X Only)
Your VCR can automatically read a 16:9 signal from the AV2 input
or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through
a 21 pin scart cable.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
#
,
❷!
or
➛
,
❿
buttons to select the
EINSTELLUNGEN option.
3 Press the OK button to select this option.
Result
: The EINSTELLUNGEN menu is displayed.
4 Press the corresponding
#
or
❷
buttons, until the cursor is
placed in front of the 16:9 option.
5 Press the
❿
button to select AUTO
➝
EIN
➝
AUS.
AUTO Set when you use a wide TV. The VCR detects wide TV
programmes and normal TV programmes automatically
when playing back and recording.
EIN The VCR always plays back and records in the mode
compatible with 16:9 wide screen. Set if the VCR cannot
detect wide TV programmes with “AUTO” set.
AUS Set if you do not use a wide TV.
6 On completion, press MENU twice to exit the menu.
O
PTIONS
OSD :EIN
KASS. WÄHLEN :E180
FARBSYSTEM :AUTO
IPC :EIN
❿
16:9 :AUTO
#❷
❿
BEENDEN:MENU
★
(SV-6333X/SV-2333X)
O
PTIONS
OSD :EIN
KASS. WÄHLEN :E180
❿
FARBSYSTEM :AUTO
IPC :EIN
16:9 :AUTO
#❷
❿
BEENDEN:MENU
★
(SV-6332X/SV-2303X)
O
PTIONS
OSD :EIN
KASS. WÄHLEN :E180
❿
FARBSYSTEM :AUTO
IPC :EIN
#❷
❿
BEENDEN:MENU
You can select the mode in which the sound is mute.
To select the audio mute mode on and off, simply press the AUDIO button
on the remote control.
Selecting the Audio Mute Mode (SV-2333X/SV-2303X)
R
E
C
M
E
N
U
A
U
D
I
O
S
P
E
E
D
D
U
B
T
V
/
V
C
R
P
EAT
X