Filter
Top Products
GB
25
Using the VIDEOPLUS+ Feature
★
(SV-645B/SV-643B Only)
Before presetting your VCR:
◆ Switch on both the television and your VCR
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1 Press the TIMER button.
Result
: The
TIMER METHOD is displayed.
2 Press the corresponding
"
or
❷
buttons, until the VIDEOPLUS
option is selected.
3 Press the
❿!
button to select VIDEOPLUS.
Result
: A message is displayed to allow you to enter the
VIDEOPLUS+ code.
☛ If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 28 if you wish to
cancel a preset recording.
4 Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢ If you wish to correct the VIDEOPLUS+ code that you are
entering:
◆ Press the
➛
button until the digit to be corrected is
cleared
◆ Enter the correct digit
5 Press the MENU button.
Result
:
The information concerning the programme is displayed.
☛ When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
"
or
❷
buttons. Refer to the following page if:
◆ The programme number or times flash
◆ You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7 Press the STANDBY/ON button to activate the timer.
8 Refer to page 28 if you wish to:
◆ Check that your VCR has been programmed correctly
◆ Cancel a preset recording
☛ The numbers next to each TV programme listing are
VIDEOPLUS+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
system is manufactured under licence from Gemstar Development Corporation.
SPEED DUB TV/VCR TIMER
1
VIDEOPLUS
CODE ---------
CODE:0-9 CORRECT:
➛
END:MENU
**
TIMER METHOD
**
STANDARD
VIDEOPLUS
"❷
❿
END:MENU
STANDBY/ON EJEC
T
SLOW
SHUTTLE
PROG
1/JAN MON 21:28
PR DAY START
→
STOP V/P
1 MO 1 12:00
→
12:50SP ON
-- ------:--
→
--:---- -
-- ------:--
→
--:---- -
-- ------:--
→
--:---- -
-- ------:--
→
--:---- -
-- ------:--
→
--:---- -
"❷
➛❿
DELETE:CLR/RST MENU
7