Samsung SV-655X VCR User Manual


 
GB
41
GB
40
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1 Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01 to 06 PHILIPS 02, 20, 22
AKAI 09, 23 SABA 13, 14, 22 to 24
GRUNDIG 09, 17, 21 SONY 15, 16
LOEWE 02 THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21
Result:
If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
You can then control the television using the following buttons.
Button Function
TV STANDBY/ON
Used to switch the television on and off.
TV or VCR
Used to switch between the TV and VCR modes.
Only the VOL
(
+ or
)
and TV STANDBY/ON
buttons are operational in VCR mode.
-/--
Used to enter a two-figure programme number.
Example
: For programme 12, press -/-- followed
by numeric buttons 1 and 2.
INPUT
Used to select an external source.
VOL + or
Used to adjust the volume of the television.
PROG/TRK
Used to select the required programme.
(
or
)
DISP./
Used to switch between an external source and
the television tuner.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Using the TV Buttons on the Remote Control
(SV-655B/650B/450B/250B/655X/650X Only)
VCR STANDBY/ON TV STANDBY/ON
SLOW
SHUTTLE
V-LOCK
CLR/RST F.ADV INDEX
TV VCR INPUT
REPEAT
SELECT
-/--
TV
VCR
INPUT
REPEAT
VOL PROG/TRK
AUDIO DISP./
CLR/RST F.ADV INDEX
TV VCR INPUT
REPEAT
VOL PROG/TRK
AUDIO DISP./
SELECT
-/--
TV
VCR
INPUT
REPEAT
VOL PROG/TRK
AUDIO DISP./
1
2
2
6
6
7
3
5
5
4
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result
: The EASY OPERATION menu is displayed.
4 Press the corresponding
or
buttons, until the
AUTO POWER OFF option is selected.
5 Press the
button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
6 On completion, press MENU twice to exit the menu.
Auto Power Off
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday.
It saves actually turning the VCR off.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding
,
or
,
buttons to select the
USER SET option.
3 Press the OK button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding
or
buttons, until the ECO. MODE
is selected.
5 Press the
❿☎
button to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the VCR STANDBY/ON
(STANDBY/ON) button again the display panel will reappear.
6 On completion, press MENU twice to exit the menu.
ECO Mode-Reducing Standby power consumption
USER SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
OPTIONS
❷☎☎
➛❿☎☎
OK END:MENU
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
➐❷
END:MENU
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
➐❷
END:MENU
BONUS
Child Door Lock System
With this mechanism you can prevent children from harming
themselves or the VCR. It stops fingers and small articles from
entering your VCR.