Samsung SVR-940/450 DVR User Manual


 
Digital Video Recorder User’s Manual
52
Set the necessary items for network connection to a computer.
1) Users can set the DDNS in the setup menu of the SVR-440/940 as below. Select the Net-
work menu and the following screen is displayed. Set [SWR] to [ON]
· NETWORK TYPE [ADSL/LAN/DHCP] : Selects the network type to connect to a computer.
· IP ADDRESS : Enters the [IP ADDRESS] that the relevant Internet service provider assigns to
a user.
· SUBNET MASK : Enters the [SUBNET MASK] address that the relevant Internet service
provider assigns to a user.
· GATEWAY : Enters the [GATEWAY] address that the relevant Internet service provider as-
signs to a user.
· DNS : Enters the [DNS] address that the relevant Internet service provider assigns to a user.
· ID : Enters a User ID registered with the relevant service provider.
· PW : Enters a User Password registered with the relevant service provider.
· DDNS SERVER ON/OFF : When the DVR is connected to a dynamic IP, the IP address
changes every time it attempts to connect to the ISP. In this case,
there is no way for a user to know the changed IP address. If a DVR
that uses a dynamic IP address is registered with its domain name,
the domain name can easily be found and can be connected even
if the IP changes.
DDNS SERVER DOMAIN ADDRESS : Input the domain address of
the DDNS SERVER that it is
using.
· ID : Input the registered ID at www.samsungipolis.com .
· PW : Input the registered PW at www.samsungipolis.com .
5.7.1 NETWORK
5.7.2 DDNS Register
5.7 NETWORK
Chapter 5. Conguration