Filter
Top Products
Digital Video Recorder User’s Manual
26
* The factory default is set to NTSC video mode and VGA video output.
SETTING
Video mode Video output
NTSC PAL BNC VGA
Factory Default
O X X O
X O X O
4.2 Power connection
4.3 Live monitoring screen
· After power is connected to the rear connector of the system, the system will be powered on.
· When power is turned on, the system will detect a video signal automatically.
· Despite of a power failure, all the setting values will preserve.
When the system is turned ON, the live monitoring screen is displayed.
Chapter 4. Operating
Chapter 4. Operating