Digital Video Recorder User’s Manual
52
Set the necessary items for network connection to a computer.
1) Users can set the DDNS in the setup menu of the SVR-440/940 as below. Select the Network menu
and the following screen is displayed. Set [SWR] to [ON]
· NETWORK TYPE [ADSL/LAN/DHCP] : Selects the network type to connect to a computer.
· IP ADDRESS : Enters the [IP ADDRESS] that the relevant Internet service provider assigns to a user.
· SUBNET MASK : Enters the [SUBNET MASK] address that the relevant Internet service provider assigns
to a user.
· GATEWAY : Enters the [GATEWAY] address that the relevant Internet service provider assigns to a user.
· DNS : Enters the [DNS] address that the relevant Internet service provider assigns to a user.
· ID : Enters a User ID registered with the relevant service provider.
· PW : Enters a User Password registered with the relevant service provider.
· DDNS SERVER ON/OFF : When the DVR is connected to a dynamic IP, the IP address changes every
time it attempts to connect to the ISP. In this case, there is no way for a user
to know the changed IP address. If a DVR that uses a dynamic IP address is
registered with its domain name, the domain name can easily be found and
can be connected even if the IP changes.
DDNS SERVER DOMAIN ADDRESS : Input the domain address of the DDNS
SERVER that it is using.
· ID : Input the registered ID at www.samsungipolis.com .
· PW : Input the registered PW at www.samsungipolis.com .
5.7.1 NETWORK
5.7.2 DDNS Register
5.7 NETWORK
Chapter 5. Conguration
Chapter 5. Conguration