Filter
Top Products
76
5.8 Event setup
For event video recording, a lower menu like the one shown below can be setup. If ‘ENTER’ key, located in
the front of DVR, is pressed or if lower level menu is selected with the mouse, detailed items may be
viewed.
5.8.1 Event
9 CHECK : Setup whether to check and store
events. [Application time setup] will be activated
only if [Event application time] is setup as
[Time application ].
9 MESSAGE [ON/OFF] : Select whether to
display event items on screen with text.
9 BUZZER : Select whether to sound the buzzer
when an alarm is generated.
9 SWITCH TO EVENT SCREEN : Setup
whether to convert the screen to the
corresponding channel when an event occurs.
9 EVENT DISPLAY MIN TIME : Min. retention time for the screen when an event occurs
(Amount of time to ignore an event if consecutive events are generated) is set within 0 ∼ 5
seconds.
9 EVENT DISPLAY MAX TIME : Max. retention time for the screen when an event occurs is
set within 0 ∼ 99 seconds or allways. [Maintain current state] During setup, display the
screen in which the event was generated continuously.
9 TEXT MONITORING : Determine whether to save characters input from external devices
through RS-232.
9 SENSOR TYPE : Setup the sensor type for the channel.(NO/NC)
NO : Open type (Normal Open) sensor.
NC : Closed type (Normal Close) sensor.
[Max. retention time] cannot be setup with a smaller value than [Min. retention
time].