Filter
Top Products
CHAPTER THREE: TV OPERATION 3.9
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the Display button is pressed, the channel label will appear
next to the channel number.
1
Press the CH ▲ or CH ▼ button
to tune to the channel that will
be labeled.
2
Press the Menu button to dis-
play the menu.
Press the CH ▼ button twice
to highlight “CHANNEL”.
Press the VOL + button.
3
Press the CH ▼ button five
times to select “Labeling”.
Press the VOL + button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields. See
top paragraph.)
4
Press the CH ▲ or CH ▼ but-
ton to select a letter, anumber,
“*”, or a blank. (Pressing the
CH ▲ button results in this
sequence: A, B, ...Z, *, blank, 0,
1,... 9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press the VOL+ button to
switch to the next field, which
will be highlighted. Select a
second letter or digit using the
the CH ▲ and CH ▼ buttons,
as above.
Repeat the process to select
the last two digits.
Press Menu twice to set the label and clear the menus from
the screen.
01066D(E)-CHAPTER 3 4/12/05 9:26 AM Page 9