Filter
Top Products
20
Note: For an explanation of Component video, see your DVD player's owner's manual.
INSTALLATION
Connecting a DVD Player
(480i/480p)
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables between the AV-2
INPUT(VCR) or AV-3
INPUT(VCR) jacks on the
TV and the AUDIO OUT
jacks on the DVD player.
2
Connect a video cable
between the COMPO-
NENT 1 INPUT (Y/V, PB,
PR) or COMPONENT 2
INPUT (Y/V, PB, PR)jacks
on the TV and the DVD-
OUT (Y, PB, PR) jacks on
the DVD player.
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the VCR.
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
(The VCR input jacks might be either on the front or on back of the VCR.)