Samsung TX-P2670WHF CRT Television User Manual


 
33
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the INFO button is pressed, the channel label will appear
next to the channel number.
1
Press the CH or CH
button to tune to the channel
that will be labeled.
2
Press the MENU button to dis-
play the menu, then press the
button to select “Channel”.
Press the ENTER button.
3
Press the button to select
“Labeling”.
Press the
button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the or button to
select a letter, a number, “*”, or
a blank. (Pressing the or
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
Note: You cannot select
“Labeling” in the A/V mode.
5
Press the
button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the and
buttons, as above. Repeat
the process to select the last
two digits.
Press the MENU button to set the label and clear the menus from
the screen.