Filter
Top Products
IN S TA L L AT I O N
19
Connecting a Digital TV Set-Top Box
(480p/1080i)
Connecting to Y, P
B
, P
R
Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs
on the TV. Next, connect the Left and Right audio from the set-top box to the corre-
sponding L and R terminals on the TV. (The connections for a typical set-top box are
shown below.)
1
Connect a coaxial cable
between the ANTENNA
OUT terminal on the Set
Top Box and the antenna
terminal on the TV.
Note: For detailed information, refer to the Set Top Box instruction manual.
Set Top Box Rear Panel
Coaxial Cable
TV Rear Panel
2
Connect a set of audio
cables between the COM-
PONENT INPUT 2 (L, R) or
COMPONENT INPUT 1 (L,
R) jacks on the TV and the
AUDIO OUT jacks on the
Set Top Box.
Set Top Box Rear Panel
Audio Cable
3
Connect a video cable
between the COMPO-
NENT INPUT 2 (Y, PB, PR)
or COMPONENT INPUT 1
(Y, PB, PR) jacks on the TV
and the VIDEO OUT (Y, PB,
PR) jacks on the Set Top
Box.
Video Cable
TV Rear PanelTV Rear Panel
Set Top Box Rear Panel
TV Rear Panel