Filter
Top Products
OPERATION
English - 22
OPERATION
Chapter Three
OPERATION
1
Press the POWER button
on the remote control.
The message “Plug &
Play” is displayed.
It flickers for a little while
and then the “Language”
menu is displayed.
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically
and subsequently: Setting the language, Antenna input check, Channel Memorize and
Time Setting.
• The Plug & Play function operates after plugging in the TV for the first time.
Plug & Play
3
Press the
œœ
or
√√
button to
select the desired video signal
source.
Press the MENU button to enter
the video signal source, then the
“Check antenna input.” is
displayed.
2
Press the
œœ
or
√√
button to
select the desired language.
Press the MENU button to enter
the language, then the
“Channel” menu is displayed.
Adjust Skip
Setup
Plug & Play
√√
Time
√√
Language
œœ
English
√√
Caption
√√
Melody : On
V-chip
√√
Adjust Skip
Channel
Auto program
√√
Add/Delete
√√
Fine tune : 00
Air/CATV
œœ
Air
√√
Name : - - - -
Check antenna input.
Auto program Skip
œ STD, HRC, and IRC identify
various types of cable TV
systems. Contact your local cable
company to identify the type of
cable system that exists in your
particular area.
œ Plug & Play feature doesn’t
work when the V-Chip is
On or when in the AV
mode.
continued...
AA68-03644A-00Eng 6/23/05 2:33 PM Page 22