Filter
Top Products
English-16
Storing Channels in Memor
y (Automatic Method)
1. Press the MENU button to display the menu.
Press the
……
or
††
button to select “Channel”, then press the ENTER button.
2. Press the ENTER button to select “Auto Program”, then press the ENTER
button.
3. Press the ENTER button to start the auto program.
The TV begins memorizing all available channels.
Press the ENTER button at any time to interrupt the memorization process.
Press the
EXIT button to exit.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels.
After the available channels are memorized, use the CH or CH button to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the
Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an antenna or a cable system).
1. Press the MENU button to display the menu.
Press the
……
or
††
button to select “Channel”, then press the ENTER button.
2. Press the
……
or
††
button to select “Air/CATV”, then press the ENTER
button.
Press the
œœ
or
√√
button to select “Air”, “STD”, “HRC”, or “IRC”.
Press the EXIT button to exit.
Move Enter Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name : ----
LNA : Off
√√
TV
Move Enter Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name : ----
LNA : Off
√√
TV
Move
œœ √√
Adjust Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name : ----
LNA : Off
√√
TV
Auto Program
Air 13
Enter Return
Start
AA68-03805A-00Eng_√÷¡æ 5/3/06 9:47 AM Page 16