Filter
Top Products
English - 15
Using Pseudo Stereo
“Pseudo Stereo” converts a mono sound signal into two identical left and right channels.
Once the “Pseudo Stereo” is set to “On” or “Off”, the setting is applied to sound effects
such as “Standard”, “Music”, “Movie”, and “Speech”.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Sound, then press the ENTER button.
2 Press the ▲ or ▼ button to select Pseudo Stereo, then press the ENTER button.
3 Press the ▲ or ▼ button to select On or Off, then press the ENTER button.
Press the
EXIT button to exit.
Using Turbo Plus
“Turbo Plus” emphasizes the bass and treble frequencies to add fullness to the sound.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Sound, then press the ENTER button.
2 Press the ▲ or ▼ button to select Turbo Plus, then press the ENTER button.
3 Press the ▲ or ▼ button to select On or Off, then press the ENTER button.
Press the
EXIT button to exit.
Press the TURBO button on the remote control repeatedly to select On or Off.
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto
Program is completed.
It removes the scrambled channels from the list by tuning the digital cable channels.
This process may take up to 20~30 minutes.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Clear Scrambled Channel, then press the ENTER button.
It searches scrambled channels, which are to be removed from the list.
To stop searching scrambled channels;
Press the ▼ button to select Stop, then press the ENTER button.
Press the ◄ button to select Yes, then press the ENTER button.
3 When the scrambled channel searching is completed, press the ENTER button.
Press the
EXIT button to exit.
Adding and Erasing Channels - Analog
You can add or delete a channel to display the channels you want.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Add/Delete, then press the ENTER button.
3 Press the ▲ or ▼ button to select the desired channel, then press the ENTER button.
4 Press the ▲ or ▼ button to select Deleted or Added, then press the ENTER button.
Press the
EXIT button to exit.
Press the ADD/DEL button on the remote control. Press the CH and CH button to
select the channel to be added or deleted, then press the ENTER button.
Move
Enter
Return
Sound
Mode : Custom
Equalizer
MTS : Stereo
Auto Volume : Off
Pseudo Stereo : Off
Turbo Plus : Off
Off
On
Move
Enter
Return
Sound
Mode : Custom
Equalizer
MTS : Stereo
Auto Volume : Off
Pseudo Stereo : Off
Turbo Plus : Off
Off
On
Move
Enter
Return
Channel
Antenna : Cable ►
Auto Program ►
Clear Scrambled Channel ►
Add/Delete ►
Fine Tune ►
Name ►
Signal Strength ►
Clear Scrambled Channel
Enter
Return
Stop
Removing Scrambled Channel.
DTV STD 50-1 60%
Move
Enter
Return
Add/Delete
▲ More
Air 2 : Deleted
Air 3 : Deleted
Air 4 : Deleted
Air 5 : Deleted
Air 6 : Deleted
▼ More
Deleted
Added
AA68-03783D-01Eng.indd 15 2007-02-09 ｿﾀﾀ・10:22:53