![](http://pdfasset.owneriq.net/2/9c/29cf8879-6ad8-41a8-ba1d-396718fb8f4a/29cf8879-6ad8-41a8-ba1d-396718fb8f4a-bg1e.png)
◀ ▶
English
◀
5. If you selected Cable, the Cable System screen appears. Select Digital, and
then press ENTER
.
N
If you selected Antenna only, Auto Program starts.
6. Select STD, HRC, or IRC, and then press ENTER
.
7. Repeat for Analog.
8. Select Next, and then press ENTER
. Auto Program starts.
N
After all the available channels are stored, Auto Program removes
scrambled channels. When done, the Auto Program menu then reappears.
This process can take up to 30 minutes