Filter
Top Products
English
- 11
Connections
Connecting External
Devices
Connecting to an AV
amplifier with the
digital input jack
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
If your A/V receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the DVD-VCR’s
built-in Dolby Digital Decoder. Use the Digital Audio Out
connection below.
To enjoy Dolby Digital or DTS sound, you must set up
the audio settings. (See page 29)
1
Connect a Digital Audio coaxial/optical cable from
the Digital Audio Out jacks on the panel of the
DVD-VCR to their corresponding Digital Audio
Input jacks on your A/V Receiver:
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2, DTS,
Digital Decoder
This allows you to connect your DVD -VCR to other
external devices and view or record their outputs.
• Connecting a VCR, Set-Top Box(STB) or DVD-VCR
to the AUDIO/VIDEO LINE IN 1 jacks.
Connecting a VCR or external device to AUDIO/VIDEO
LINE IN 1 jacks of the DVD-VCR.
You can record from connected equipment (VCR, STB
or DVD).
Copy protected content cannot be recorded.
Note
* DVD-V6500K
* DVD-V7000K