Filter
Top Products
English
9
2. Correcting height difference between upper and lower monitors.
• If you turn the ne-tuning screw on the bottom of the monitor clockwise or counterclockwise, the monitor will move
up or down respectively.
The ne-tuning screw’s maximum movement range is 10 mm.
<Raising the monitor>
TO ADJUST THE HEIGHT DIFFERENCE BETWEEN
THE MONITORS ON THE UPPER LAYER,
1. Move upward a monitor and leave enough space to t in your hand below the monitor.
2. Rotate the monitor, unfold the holder attached to the bracket and x the monitor in the holder.
3. Turn the ne-tuning screw to correct the height difference.
4. Repeat steps 1~3 till you obtain the optimum result.
Fixing the monitor
in the holder
* Be careful not to catch your ngers.
* Ensure the holder is fastened to the wall-mount bracket ⓑ.
* Note that the holder is not compatible with some monitor models.
<Lowering the monitor>
BN68-01537H-00.indb 9 2012-10-29 오후 5:23:02