Filter
Top Products
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1 In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2 If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically ” on page 15
◆ “Storing Channels Manually” on page 17
Connecting to an Aerial or Cable Television Network
Rear of the TV
Cable Television
Network
or
English-10
AA68-03606A-00Eng_Asia 3/10/05 10:44 AM Page 10