Filter
Top Products
English - 43
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1 Check that all the necessary connections have been made.
2 Switch your television on, then press the SOURCE
()
button
repeatedly.
Result
: The input sources are displayed in the following
order:
EXT1
-
EXT2
-
EXT3/S-Video
-
Component
➢
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV ()
button and select the number of the channel required.
Viewing Pictures From External Sources
d
Connecting to the DVD Player
◆
Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player. Connect the RCA Cable to “
Y”, “P
B
”, and “P
R
” on the rear of your television
and the other end to the “Component Video Out (Y, P
B
, P
R
)” connectors of the DVD player.
◆
Only black signal is output from a monitor in Component mode.
DVD
Rear of the TV
➢
Available format for Component inputs; 480i, 480p, 576i, 576p,
1080i - 50Hz.
AA68-03554A-X5Eng 2/17/05 12:03 PM Page 43