Filter
Top Products
TV operation
1
2
3
4
To turn on the TV, press POWER.
Adjust the volume level by
pressing VOL + or -. The volume
level will be indicated on the
screen by white bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of white
bars also decreases.
Set the TV/CABLE menu
option to the appropriate
position (see page 23).
Press the Direct Channel
Selection (0=9,-) buttons to select
the channel.
TO SELECT ANALOG CHANNELS
1-9: Press 0 twice, then 1-9 as
needed. Example, to select channel 2, press 0, 0, 2.
10-99: Press 0, then the remaining 2 digits. Example, to
select channel 12, press 0, 1, 2.
100-125: Press the 3 digits in order. Example, to select
channel 120, press 1,2, 0.
ANT
ABCD
CABLE
ANALOG 1 2
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the - button, followed by the
remaining 3 digits.
Example, to select channel 015-001, press 0, 1,5, -, 0, 0, 1.
• If a channel is selected with only audio content, "AUDIO
ONLY" will be displayed on the screen.
• If a channel is selected with a weak digital signal, "DIGITAL
CHANNEL SIGNAL STRENGTH IS LOW" will be displayed
on the screen.
• If a channel is selected to which you have not subscribed,
"DIGITAL CHANNEL IS SCRAMBLED" will be displayed on
the screen.
NOTES:
• If a channel with no broadcast is
selected, the sound will automatically
be muted.
• It may take a few seconds for a digital
channel picture to appear on screen
after being selected.
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
CABLE
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
20