Filter
Top Products
EN 10
Remote control
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover.
Before using the remote control, batteries must first be installed.
Use two “AAA” size batteries. The batteries may last
approximately one year depending on how much the
remote control is used. For best performance, it is
recommended that batteries should be replaced on a
yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different
types.
BATTERY PRECAUTIONS
These precautions should be followed when using
batteries in this device:
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when
installing the batteries as indicated in the battery
compartment. Reversed batteries may cause
damage to the device.
Do not mix different types of batteries together
(e.g. Alkaline, Carbon-zinc or Rechargeable) or old
batteries with fresh ones.
If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
•
•
•
•
•
1.
(POWER) Button - Use to turn the power on/off
to the TV.
2.Direct Channel Selection Buttons (0-9) - Allows
direct access to any channel of the TV.
3.– Button -This button is used when selecting
digital channels.
4.SLEEP Button - To set the TV to turn off after a
preset amount of time, use the SLEEP button on
the remote control.
5.CH (CHANNEL) + / – / CURSOR
/
Buttons - Use to operate the menu functions of
the TV, and to change the channels of the TV.
6.MENU Button - Use to display the On-Screen
menu function.
7.AUDIO Button - Change soundtrack language.
8.INPUT SELECT Button - Use to change the
external input.
9.PICTURE SIZE Button - Use to change the
picture size.
10.RECALL Button - This button allows you to go
back to the previous channel selected by just
pressing the RECALL button. Press this button
again to return to the channel you were watching.
11.MUTE Button - To turn off the sound, press this
button once. The TV will be silenced and the
symbol “Mute” will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME)
+ or – buttons.
12.
VOL (VOLUME) + / – / CURSOR
/ Buttons
- Use to operate the menu functions of the TV.
Press the
button to increase, or the button to
decrease the sound level.
13.ENTER Button - Use to enter or select
information for On-Screen operations.
14.EXIT Button - Press to remove setup menu.
15.CCD Button - Use to display the Closed Caption
menu screen.
16.DISPLAY Button - When you press this button,
the current information will be displayed on a
screen. To remove the display from the screen,
press this button again.
17.Time Shift control Buttons - See page 23.
2
10
5
1
6
14
4
3
8
9
7
11
12
13
15
16
17
J3NV0721A_EN.indd 10J3NV0721A_EN.indd 10 8/20/12 5:03:56 PM8/20/12 5:03:56 PM