Filter
Top Products
Adjusting MENU Options
Setting System
Accessing Settings Menu
1. Press MENU.................
2. Highlight [Settings].....
3. Press OK......................
Use or button.
Channels
Locks
Guide
Picture
Audio
Date & Time
Timers
Input Select
Closed Captions
Menu & Displays
RESET ALL
Settings
Setting Date & Time
Clock/Calendar
Press OK to finish
Today's Date
Current Time
Time Zone
Adjust for Daylight Saving Time
Auto-Update Time
June 29, 2006 6:29 PM
Eastern (US, CAN)
Done
Date & Time
Timers
Input Select
Closed Captions
Menu & Displays
RESET ALL
Option Description
Select to set date.
Today's Date
Current Time
Select to set current time.
Time Zone
Adjust for Daylight
Saving Time
Auto-Update Time
Select a proper time zone according to your local area.
Select to observe daylight saving time.
Select to automatically update time from the service provider
if this information is broadcasted with the program as well.
When the [Auto-Update Time] is
set to ON, the [Today's Date] and
[Current Time] items can't be
accessed.
Setting Timer
Date & Time
Timers
Input Select
Closed Captions
Menu & Displays
RESET ALL
Timers
Press OK to finish
Done
Timer is on
Start Time Duration
8:00 PM
01:30
Option Description
Select to activate current timer.
Select to set a start time so that the TV automatically turns on
at the selected time.
Timer is on
Start Time
Duration
Select to set a duration time that you want the TV to remain on
before shutting off automatically.
By using the SLEEP button, the
TV allows you to set the amount of
time (15 minutes, 30 minutes, 45
minutes, 60 minutes or 90 minutes)
that you want the TV to remain on
before shutting off automatically.
If you select [Leave TV on], the
unit cancel the sleep timer setting.
Press OK
or button.
Press OK
34
When the TV automatically turns on at the select time, if you operates the TV by pressing any button, the TV automatically cancels
the duration time and remains on unless the user turns off the TV.
You need to set the Timer again to use this feature another time.
To highlight an option and to change settings, press . Press OK to confirm the selection or alter the settings.
Press EXIT to exit.