Filter
Top Products
15
14
SET-UP
MANUAL MEMORY (channel add/delete)
1. TO ADD A CHANNEL
If you want to add a channel not store during AUTO PROGRAM to the memorized channel
follow these steps.
Select a channel you want to view by using the number buttons on the remote control.
Press
"ADD/DEL" button on the remote control.
The channel is added to memory and the color of the channel number changes from
magenta to green.
2. TO DELETE CHANNEL
You can exclude the channels of your choice from the memorized channels.
Follow these steps to delete the channel in the TV's memory.
Press CH / buttons or use the number buttons to select a channel you want to delete.
Press "ADD / DEL" button on the remote control.
The channel is removed from the memory and the color of the channel number changes
from green to magenta.
2
CATV
2
CATV
CHANNEL ADDING
CHANNEL DELETING
COLOR
: GREEN
COLOR
: MAGENTA
SET-UP
AUTO CHANNEL PROGRAMMING
This function allows the channels to be memorized automatically to match the TV broadcasts
and cable channels in your area.
1. Press MENU button, move the cursor to "SETUP" option and press VOL + button. The "SET
UP" menu is displayed.
2. Press CH
/ buttons to place the cursor on the "AUTO PROGRAM" option and press
VOL + button.
When tuned to an active channel in which TV programming is broadcast, this channel is
memorized and the color of the channel number changes from magenta to green.
After all active channels are memorized, "SETUP" menu is displayed.
3. When you have finished "AUTO PROGRAMMING", press MENU button repeatedly until the
menus disappear.
NOTES
If the broadcast signal is weak, the channel will not be memorized.
If you wish to stop this procedure during the operation, press VOL + button.
MENU
PICTURE
SOUND
TIME
SETUP
FUNCTION
LANGUAGE : ENGLISH
: SEL. +: ENTER :EXIT
SETUP
ANTENNA : CATV2
AUTOPROGRAM
FINE TUNE : 0
LNA : ON
: SEL. +: ENTER :PREV.
SETUP
ANTENNA : CATV2
AUTO PROGRAM
FINE TUNE : 0
LNA : ON
: SEL. +: ENTER :PREV.
AUTOPROGRAMMING
CATV 15
+
STOP
25%