Sanyo CE32WN3-B CRT Television User Manual


 
13
The rear of the set includes the antenna input line and two SCART
or Euro connector connections, with some common features and
other features that are unique to each connector.
Common Features:
- Video signal (CVBS) and stereo audio signal input.
- Automatic switching when VCR is in “PLAY” mode, as well as
auto selection of 4/3 or 16/9 format if the VCR provides this
feature.
- Audio output channel selection in Dual broadcasts (A&A,B&B
or A&B).
Right Euroconnector:
- Input: RGB signal type.
- Output: Always matches antenna input signal.
Left Euroconnector:
- Input: SVCR format signal.
- Output: Always matches signal shown on screen, which can
come from the antenna or any other input.
There are two possibilities:
Via the antenna jack: In this case you must tune the VCR chan-
nel.
Select the test pattern screen (check your VCR User’s Manual to
see how to do this) and tune the channel. Use of the Semi tuning
mode is advisable (see “Presetting” on page 11).
Drawbacks:
- Lower picture and sound quality during playback.
- Cannot play back in stereo.
Via Euroconnector: Advantages:
- Better picture and sound quality.
- Stereo sound can be played back.
If you have an S-VHS video cassette recorder, connect it to the
left Euro connector. For viewing, make sure you have the
Connections menu option enabled (see “Externals Menu” on page
10).
This TV set has a number of connectors providing optimum
connection of the TV set to a wide range of peripherals. Keep in
mind that the use of the appropriate connecting cable is essential for
good results.
Stereo Headphone Jack The Sound menu provides a specific
set of sound control options (Volume, Balance, Bass, Treble) that
are available only when the TV set detects that headphones are
actually plugged into the set.
When the set receives a Dual language broadcast another option
(mode) will appear. This allows you to select which language you
want to hear by changing between Dual A and Dual B. (see page
10).
AV3 Front RCA Sockets
Behind the flap on the front of the TV are located 3 RCA input
sockets. These are as follows :
Yellow : Video Input
White : Audio (L) Input
Red : Audio (R) Input
AV3 mode is not available until a plug is inserted into the yellow
(Video) socket. If you wish to only use these sockets for an audio
input you must still fit a dummy plug into the Video Socket. If only
one sound channel (mono) is available, plug this into the white
(Audio L) socket.
When the button is pressed the mode changes as follows.
Press the button to select the mode you require.
Note : Most equipment connected via AV1 or AV2 will automatically
switch the TV to AV mode when the play button is pressed.
Note : AV3 mode cannot be selected if no plug is inserted into the
AV3 white (Video) socket.
TV/
CONNECTION OF A
CONNECTION OF A
V EQ
V EQ
UIPMENT
UIPMENT
Connectors Located on the Rear of the TV Set
Connecting a VCR
Connectors Located on the Front of the TV Set
Your Video Camera
can also be connected
by using the Front AV.
AUTO
TV
AV1
AUTO
AV2
AUTO
AV3
AUTO
When AV3
is not
connected