Sanyo CLT1554 Flat Panel Television User Manual


 
Adjusting Sound
Select desired sound setting: Audio, Bass, Treble or Surround.
1. Choose Audio from the Sound menu options.
2. Use the /keys to select the sound setting you want to
change. (Red arrow indicates selected highlighted option.)
3. Use the /+ keys to adjust settings: Stereo, Mono or SAP.
Notes: Stereo and SAP must be part of the broadcast
signal.
The TV will automatically reset to stereo if
unplugged or a power failure occurs.
4. To adjust the other sound features: Bass, Treble, or
Surround, simply follow steps 2~3 above.
Adjusting the Channel Tuning
Resetting the Antenna Mode and Channel Search
Resetting the Antenna or CH. (Channel) Search is required
only if additional channels become available, such as moving
to another city or having a cable service installed.
1. Choose Antenna or CH. Search from the Channel menu
options. (Red arrow indicates selected menu option.)
2. Use the /+ keys to change Antenna settings: Cable or
UHF/VHF. For CH. Search, press the + key. The TV will
automatically start searching for your channels. It will take
the TV several minutes to complete the search.
Adding or deleting Channels
1. Choose CH. Memory from the Channel menu options.
(Red arrow indicates selected highlighted option.)
2. Press the + key to select the channel number entry area.
3. Enter the channel number you want to add or delete
(example): C34. For cable channels above 99, press and
hold the 1 key until C1– – appears. Then enter the other
two numbers.
4. Press the + key to change the present setting. Example:
Added will change to Deleted. This takes about three
seconds. During that time, the word “Added” or “Deleted”
will become white.
5. Use the 0~9 or /keys to chose other channels to
delete or add, or press Menu key to exit.
QuickTips
Under weak stereo
signal conditions,
you may receive
better quality sound
in the “Mono”
position.
Surround sound
expands the sound
effect while receiv-
ing MTS stereo
signals.
Pressing the
RESET key will
clear all customized
settings. The TV will
automatically start
Channel Search and
clear settings.
Channels deleted
from scan memory
can be selected with
the number keys.
Restoring deleted
channels, use the
on-screen menu
to manually add
channels or start
CH. Search from
the menu. It make
take a few minutes
to search thru the
available channels.
or press the
RESET
key.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
TV Adjustment and Setup (Continued)
Adjusting Sound / Channel Tuning
12