Filter
Top Products
24
SLEEP TIMER OPERATION
The sleep timer automatically switches off the power after a preset time
has elapsed. The volume will gradually be reduced (fade-out) during the
1-minute period before the unit turns off. There are 4 time periods
available: 30, 60, 90 and 120 minutes.
Press the SHIFT + 6 SLEEP buttons repeatedly to select the desired sleep
time. “SLEEP” and the selected time blink on the display. After several
seconds, the original display returns and the brightness of the display
reduces. “SLEEP” blinks.
To check the remaining sleep time
Press the SHIFT + 6 SLEEP buttons once. After several seconds, the
original display returns.
To release the sleep timer while in operation
Press the SHIFT + 6 SLEEP buttons until “SLEEPOFF” appears. The
timer is also released if the power is switched off.
To search a preset station by PTY codes
A particular programme type broadcast can be located by specifying the
PTY codes.
1. Press the RDS button to select “PTY” while listening to an FM
broadcast.
2. Press the TUNE/PTY “+” or “–” button within 2 seconds to select the
desired PTY code. The PTY code changes as shown below;
NEWS
v
AFFAIRS
v
INFO
v
SPORT
v
EDUCATE
v
DRAMA
v
CULTURE
v
SCIENCE
v
VARIED
v
POP M
v
ROCK M
v
EASY M
v
LIGHT M
v
CLASSICS
v
OTHER M
v
WEATHER
v
FINANCE
v
CHILDREN
v
SOCIAL
v
RELIGION
v
PHONE IN
v
TRAVEL
v
LEISURE
v
JAZZ
v
COUNTRY
v
NATION M
v
OLDIES
v
FOLK M
v
DOCUMENT
v
TEST
v
ALARM
(or in the reverse sequence)
3. Press the PTY CHK (e) button within 10 seconds.
The unit searches 24 preset stations and stops when it finds a
broadcast of the PTY code you have selected, then tunes into that
station.
- To continue searching after the first stop, repeat steps 1 - 3 above.
- If no broadcast is found, the original station is heard.
To cancel searching, press the n button.
MAINTENANCE
Cleaning the unit
Clean the outside of the unit with a clean soft cloth moistened with lukewarm water. Do not use benzene, thinner or alcohol since they will mar the finish
of the surfaces.