Sanyo DP50749 Flat Panel Television User Manual


 
21
Need help? www.sanyoctv.com 1-800-877-5032
(Advanced operations continued on page 22.)
2. Press and hold SET until the mode LED blinks
twice, then release.
3. Enter 9 7 3.The mode LED blinks twice.
4. Press CH once. The mode LED blinks twice.
Now, regardless of what mode you select, the
channel keys will only change channels on the
assigned device.
UNLOCKING CHANNEL LOCKS
To unlock Channel Lock and thus allow the chan-
nel control functions to work with the device
associated to the active operating mode, follow
these steps:
1. Press and hold SET until the mode LED blinks
twice, then release.
2. Enter 9 7 3. The mode LED blinks twice.
3. Press CH once. The mode LED blinks 4 times.
Now the channel functions will correlate to the
active mode (e.g., press CHin TV mode and the
TV changes channel accordingly).
USING KEYMOVER
Your GXDB universal remote control includes a
Keymover feature that allows you to map (or copy)
keys from one mode (i.e., source mode) to another
mode (i.e., destination mode) or to a different key in
the same mode.
NOTE: Do not use any of the
DEVICE KEYS
,
POWER
,
RECORD
, or
SET
as a source or destination key.
MOVING KEYS IN THE SAME DEVICE MODE
1. Press the desired device key (DVD, STB, or
AUX).
2. Press and hold SET until the LED blinks twice,
then release.
3. Press 9 9 4. The LED blinks twice.
4. Press the key you want to move.
5. Press the new key that should perform the
function. The LED blinks twice.
6. Repeat steps 1-5 to move additional keys.
MOVING KEYS TO A DIFFERENT DEVICE MODE
This lets you, for example, control DVD functions
while in TV mode. You would move the transport
key functions (PLAY, STOP, etc.) from DVD mode
to TV mode, as follows:
1. Press and hold SET until the LED blinks twice,
then release.
2. Press 9 9 4. The LED blinks twice.
3. Press the device key that contains the function
you want to move (e.g., DVD).
4. Press the key you want to move (e.g., PLAY).
5. Press the device key that you want to move the
function to. (e.g., TV).
6. Press the key in the new mode that should per-
form the function (e.g., PLAY). The LED blinks
twice.
7. Repeat steps 1-6 to move additional keys.
RESTORING ORIGINAL KEY FUNCTION
1. Press the device key for which you wish to
remove the keymoved data from a specific key.
2. Press and hold SET until the LED blinks twice,
then release.
3. Enter 9 9 4. The LED blinks twice.
4. Press the key you wish to remove the key-
moved data from twice. The LED blinks twice.
5. Repeat steps 1-4 for additional keys you wish to
remove.
RESTORING ALL KEYMOVED DATA IN A
SPECIFIC MODE
1. Press and hold SET until the LED blinks twice,
then release.
2. Press 9 9 4. The LED blinks twice.
3. Press the device key you wish to remove all
keymoved data from twice. The LED blinks
twice.
4. Repeat for each device you want to restore.