Filter
Top Products
6
Connect a DVD Player to Component AV In
CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
❶
Connect a DVD Player or other equipment’s interlaced Component Video Out to the TV
Component Video In (Y-Pb-Pr) Jacks.
❷ Connect the DVD Player’s Audio Out to the TV A/V2 Audio In (L/R) Jacks.
❸
Press POWER to turn on the TV. Turn on external equipment also.
❹ To access Audio/Video inputs, press the INPUT key to select COMPONENT2.
Notes: DVD Player component output must be set to Interlaced (480i).
Audio/Video Input (AV2) and Component inputs share the same audio (R/L) input
jacks.
Connect equipment to the component video inputs or the AV2 video input, but not
both types at the same time.
Y
P
B
/CB /CR
PR
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
AUDIO VIDEO
INPUT 2
R
L
UHF/VHF/CATV
75Ω
PR
PB
Y
VIDEO
COMPONENT
2
S-VIDEO
DVD Player
❶
TV BACK
❷
QuickTips
■
A solid Blue screen
with COMPONENT2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Component jacks.
Check connection,
and turn on external
equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
What you will need for connections:
❶
Component video cable – 1
❷ Audio Cable – 1
Using the Component Video and Audio Input Jacks
❶
Press INPUT key after
connecting cables to access
the A/V inputs.
There is NO need to tune
to a blank channel.
MENU RECALL
RESETINPUT
CH
POWER
❸
❹
Remote Control
❷