Sanyo DS32224 CRT Television User Manual


 
REMOTE CONTROL KEYS
Mode Keys—Use these keys to program the
remote control and to select the operating mode
(VCR, TV, or AUX).
To Operate Your... VCR—Press the VCR key;
Television—Press the TV key; Cable Box or
DVD Player—Press the AUX key.
Note:
Make sure you hold
down the mode
key while entering a code number, see
page 10.
Input Key—Press to select the program source:
TV signal or signal from the DVD Player or
other equipment you have connected to the A/V
jacks.
Number Keys—Two keys must be pressed to
select a channel. Example:Press 0 then 6 to select
channel 6. F
or cable channels 100 through 125,
press and hold the 1 key until C1–– appears. Then
press the other two numbers.
Caption Key—See page 14.
Menu Key—Use this key with the /and
/+ keys to navigate and adjust features of the
on-screen menu system (see pages 13 ~ 14).
Channel Scanning (CH /) and Volume
(VOL /+) Keys—Press to scan through the
channels in memory and to adjust the volume.
Mute Key—Press once to minimize the volume.
Press again to restore.
Note:
When using the audio out jacks this key
will not mute the sound.
VCR/DVD Keys—These keys control VCR or
DVD functions for Fast Forward (
), Rewind
(
), Play (), Record (REC), Stop (), and
Pause.
V-Guide Key—See pages 15 ~ 16.
QuickTips
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want to
operate. Objects bet-
ween the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
If the remote control
does not work: Press
TVkey (see item 1).
The remote control
must be programmed
before it will operate
your VCR, DVD
Player, or Cable Box.
See pages 10~12.
Cannot select
channel with number
keys. Press “0” in
front of numbers 1~9.
Example: Channel 05.
Adjusting the volume
level: Flashing Right
arrow indicates
volume is increasing
and flashing Left
arrow indicates
volume is decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
RECALL
DISPLAYMUTE
PLAY
PAUSE
V-GUIDE
REC STOP
MENU
CAPTION SLEEP
RESETINPUT
CH
VOL VOL
POWER
VCR TV AUX
123
456
789
0
123
456
789
0
(Continued on page 10.)
Point towards TV
or Equipment
Remote Control Operation
9