Filter
Top Products
-E12-
Notes:
• For VIDEO connection, please refer to “BASIC CONNECTIONS”.
• Please refer to the instruction manual of your amplifier.
• When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall
outlet until all the connections have been made.
Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder
(Example 4)
To COAXIAL DIGITAL OUT jack
To enjoy Dolby Digital sound
Select “Dolby Digital BitStream” in “Setting Digital Out” on the
INITIAL SETTINGS. (See page E31.)
To enjoy DTS sound
Select “DTS On” in “Setting Digital Out” on the INITIAL
SETTINGS. (See page E31.)
To enjoy MPEG2 sound
Select “MPEG BitStream” in “Setting Digital Out” on the INITIAL
SETTINGS. (See page E31.)
Connecting to a Digital Amplifier (Example 5)
You can enjoy 2 Channel Digital Stereo Sound.
To digital audio input
Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder
*Coaxial cable
(not supplied)
Surround
right speaker
Subwoofer
Front right
speaker
Surround left
speaker
Front left
speaker
Center
speaker
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
To enjoy 2 Channel Digital Stereo sound
Select “Dolby Digital LPCM”, “MPEG LPCM”, and “DTS Off” in
“Setting Digital Out” on the INITIAL SETTINGS. (See page E31.)
Note:
If “DTS On” is selected, loud noise will occur. (See page E31.)
To digital audio input
*Please consult your local audio/video dealer.
Amplifier with an optical digital input
Front right
speaker
Front left
speaker
To COAXIAL DIGITAL
OUT jack
*Coaxial audio cable
(not supplied)
DVD-SL33/CA(English) 13/06/2003, 10:0613