Sanyo DVD-SL33 DVD Player User Manual


 
-E15-
BASIC OPERATION
Preparations
Turn on the power (TV, Audio System, AV amplifier, etc.).
Select the video input sources from your television.
(Please refer to your TV instruction manual.)
Select the playback picture size according to the aspect ratio
of the TV. (For more details, see “Setting Display” on page
E30.)
TV
VIDEO
4:3 LB 4:3 PS 16:9 :
(Letterbox): (Panscan):
Select the audio input source (Audio System, AV amplifier,
etc.).
When the DVD video player is connected to the COM-
PONENT VIDEO OUT jacks of the TV (see pages E8, E10
and E11), you must select the INTERLACE or PROGRES-
SIVE position.
Note: Initial setting is “INTERLACE”. If you use a Con-
ventional TV for first time, skip this section.
1. Turn on the power (TV and DVD video player).
2. In “No Disc” mode, until “
” (INTERLACE) or “
(PROGRESSIVE) appears on the TV screen.
Conventional TV: Select “
”.
TV with Progressive-scan Capability: Select “
”.
Note:
In “
” mode, the closed caption may not appear on the
TV screen.
Important Note:
This instruction manual explains the basic instruction of
this unit using the remote control.
Some DVD video discs have different functions that may
not be explained in this indtruction manual. You may need
extra instruction. In this case, please follow the instruc-
tions displayed on the TV screen or jacket or case of the
disc.
•“
” may appear on the TV screen during operarion.
This icon means that the function is not available on the
disc now.
For improvement, FL displays and on-screen displays sub-
ject to change without notice.
Basic Playback
Notes:
Do not touch the disc tray while it is moving.
Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
Do not apply excessive force to the disc tray.
Discs must be placed on the disc tray one at a time.
When operation buttons are pressed, that operarion is displayed
on the TV screen. The display turns off after several seconds.
3 2,4 5 1
z/ONefan
q
OPEN/CLOSE
LAST MEMO
PICTURE
MODE
OPEN/CLOSE
z/ON
REPEAT A-B REPEAT
PROGRAM
/RANDOM
ON SCREEN
ZOOM ANGLE
ANGLE
REPLAY
SETUP MENU
SUBTITLE
CHANGE
4
ab
5
ENT
SUBTITLE
ON/OFF
AUDIO
RETURN
TOP MENU
REV SLOW FWD SLOW
PAUSE/STEP
PREV NEXT
PLAY
REV
FWD
CLEAR
123C
1 2,4
5
1. Press [z/ON].
“SANYO” logo appears on the TV screen.
“-----” blinks, and then “NO dISC” appears on the FL
display.
2. Press [q OPEN/CLOSE] (or [OPEN/CLOSE] on the remote
control).
“OPEN” appears on the FL display and the disc tray opens.
Note:
To open or close the disc tray, be sure to press [q OPEN/
CLOSE] (or [OPEN/CLOSE] on the remote control). Do not
press the disc tray with your hand.
3. Place the disc with the label facing up on the disc tray.
or
For 5-inch (12cm) disc For 3-inch (8cm) disc
DVD-SL33/CA(English) 13/06/2003, 10:0616