14
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
IMPORTANT FACT: This DTV maintains only one database of
digital channels. Therefore, when you search for ClearQAM
digital cable channels, the database of antenna digital channels
will be deleted. You will only be able to receive those Clear-
QAM channels your cable company provides.
Cable companies rearrange virtual channels as programming
changes, which may cause the program you are watching to
move to another channel. This message will appear on the
screen briefly to notify you of a change. You will have to re-
locate the program you were watching by scanning through
the channels.
To restore the antenna digital channel database, reconnect the
antenna and use the menu system to perform a normal
Channel Search.
Program change
from cable company
DIGITAL CABLE SEARCH (OPTIONAL)
This DTV can receive unscrambled (ClearQAM) digital
cable channels, when available. However, not all cable
companies provide ClearQAM digital channels.
Searching for digital cable channels will take about 10
minutes, please be patient.
1
Connect a Digital Cable signal directly to
the DTV Digital Antenna In Terminal.
2
Press the TUNER key to select the Digital Tuner.
3
Press the MENU key to display the Main menu.
4
Use the CURSOR ▲▼ keys to highlight the
Channel
category. Press ENTER.
5
Use the CURSOR ▲▼ keys to highlight
Digital
Cable Search
option. Press ENTER.
6
Use the CURSOR ▼ key to select Yes. Press
ENTER.
NOTE: After Channel Search is complete, the DTV will
tune to the lowest Digital Cable channel (or lowest Analog
channel if no Digital Cable channel is found).
CHANNEL SETUP OPTIONS
CHANNEL SEARCH
1
Press the MENU key to display the Main menu.
2
Use the CURSOR ▲▼ keys to highlight the
Channel
category
.
Press ENTER.
3
Use the CURSOR ▲▼ keys to highlight the
Channel
Search
option. Press ENTER.
4
Use the CURSOR ▼ key to select Yes. Press
ENTER.
Use Channel Search to replace existing Digital and Analog
Channel Scan databases, such as, if you move to another
city or have cable service installed.
NOTES:During Channel Search, current Digital and
Analog channel databases are deleted and new
ones created. To receive Digital Cable channels,
you will have to perform a Digital Cable Search.
To add new channels to existing databases, use
Digital Add-on Search on page 15.
DIGITAL
ANTENNA IN